Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: BagHolder_Poxygrid
Bel-Art Bag Holders - PoxygridHolds Bags in Place and Provides a Large Opening for WasteSturdy wire holder keeps bags open while a separate hooked ring that rests over the top keeps them securely in placeBright biohazard orange colored epoxy-coated steel wireChemical and corrosion-resistant; unaffec..
Brand: Bel-Art
Model: BagHolder_Clavies
Biohazard Bag Holders - Clavies®Keep Bags Open for Easy AccessKeep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification ..
Brand: Agilent
Model: 5021-1845
Agilent Cartridge System (AC) cartridge holder For 2.0, 3.0, 4.0 and 4.6 mm id cartridges column..
Brand: Bel-Art
Model: F18309-0100
Weighted Beaker/Flask Holder with Vikem Vinyl CoatingWeight: 0.46lb for 100ml BeakersEliminate Drifting and Tipping in Cool or Hot Water BathsWeighted holder grips beakers or flasks firmly with four flared stainless steel prongs.Vikem® vinyl-coated lead ring weight secured beneath holder Keeps conta..
Brand: Bel-Art
Model: F18309-0250
Weighted Beaker/Flask Holder with Vikem Vinyl CoatingWeight: 0.75lb for 250ml BeakersEliminate Drifting and Tipping in Cool or Hot Water BathsWeighted holder grips beakers or flasks firmly with four flared stainless steel prongs.Vikem® vinyl-coated lead ring weight secured beneath holderKeeps contai..
Brand: Bel-Art
Model: F44542-0000
This slide holder has a sloped groove that accepts up to 10 single or double slides standing on end.
• Front ledge serves as a place to dry slides
• Made of durable polystyrene..
Brand: Bel-Art
Model: H44557-0000
With these handy files near your microscope, slides are always separated, visible and orderly.
• Vacuum-formed polystyrene 12-place slide holder
• Allows slides to project over the rack’s edge for easy handling..
Brand: Bel-Art
Model: F18228-0000
Acetal Mid-Range Plastic Tubing ClampsFor ⅛ to ⁷⁄₁₆ in. O.D. Tubing (Pack of 12)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tub..
Brand: Bel-Art
Model: F13373-0000
Captor Pen Holder; 1 x 1 x 2 in. (Pack of 3)Avoid fumbling and possible contamination of samples by keeping a marking pen handy and easy to uncap with only one hand.Ideal for use near an autoclave, incubator, centrifuge, storeroom, freezer or anywhere on the lab benchAdhesive backed, press-fit Dual ..
Brand: Bel-Art
Model: F18202-0000
Chromatography Column HolderSize: 12¼ x 2½ in. for up to 8 1³⁄₁₆ in. ColumnsSecurely holds as many as eight chromatography columns up to 30mm (1³⁄₁₆") in diameter in or between its flexible loops.Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rodsTigh..
Brand: Bel-Art
Model: F13192-0001
Biohazard Bag
holders – Clavies®
Keep Bags Open for Easy Access
Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in col..
Brand: Bel-Art
Model: F13192-0002
Biohazard Bag holders – Clavies®Keep Bags Open for Easy Access Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification..
Brand: Bel-Art
Model: F13192-0003
Biohazard Bag holders – Clavies®Keep Bags Open for Easy Access Keep bags open and securely supported on these economical, lightweight, stainless steel wire frames. Polypropylene bottom serves as a containment tray in the event of bag leakage and is safety orange in color for easy identification..
Brand: Bel-Art
Model: F13192-0102
Clavies® Orange Biohazard Bag Holder CoverFor F13192-0002 and F13192-0003Dishwasher and autoclave-safe, the reusable Clavies® Biohazard Bag Holder Cover opens quickly and easily by pressing the built-in release tab- no batteries required !Orange cover fits both the Medium and Large sizes of the Clav..
Brand: Bel-Art
Model: F18796-0000
Conical Tube HolderFor 15ml and 50ml Tubes, Polypropylene (Pack of 4)The most versatile conical tube holder on the market, it sets up in just seconds to hold either a 15ml or a 50ml conical tube.Open uprights allow you to view the entire contents of the tube; no more guessing if there is liquid rema..
Brand: Bel-Art
Model: F18795-0001
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18795-0000
Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube.
• Non-grip style (white) allows the tube to be lifted freely from holder as needed
• Grip style (blue) stays with the tube when it is lifted from th..
Brand: Bel-Art
Model: F18237-0000
Dialysis Bag Clip Holders (Pack of 6)Suspend dialysis bags in large beakers or pitchers up to 0.63cm (¼") thick with these strong clips. Bags slide easily into the slot and then the holder can be clipped onto the container’s edge
Smooth polypropylene surface may be marked with identifying sequence n..
Brand: Bel-Art
Model: F18954-0002
This polypropylene system is strong enough to support the weight of even the heaviest pipettor. Hold a single pipette with one clamp or add a triple clamp or extenders to increase the number of holders at a work location.
• Utility tray mounts between two clamps; ideal for storing pipetting supplie..
Brand: Bel-Art
Model: F38951-2006
These unique holders are perfect for keeping round and tapered bottom flasks upright. • Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holder
• Wide base keeps flasks stable
• Side slots can be used as sight windows
• Molded from polypro..
