Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: F19626-0000
28-Piece Plastic Fitting KitEconomical and PracticalCompatible with tubing from 3.2 to 12.7mm (⅛ to ½"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit ..
Brand: Bel-Art
Model: F30917-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: F30915-0000
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.
• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Brand: Bel-Art
Model: F19713-0001
Check ValvesSize: ³⁄₃₂ in. Bore, ⁵⁄₁₆ to ¼ in. Taper, LDPE (Pack of 12)Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.Operate positively; instantly blocks flow if direction changesBuilt-in arrows indicate direction of free flowNeoprene disk, no metalMaxi..
Brand: Bel-Art
Model: F19713-0002
Check ValvesSize: ¼ in. Bore, ½ to ⅜ in. Taper, LDPE (Pack of 12)Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.Operate positively; instantly blocks flow if direction changesBuilt-in arrows indicate direction of free flowNeoprene disk, no metalMaxim..
Brand: Bel-Art
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19715-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: H19717-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art
Model: F19625-0000
Complete 72-Piece Plastic Fitting AssortmentMake the Right Connection - 72 piecesStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy ..
Brand: Bel-Art
Model: H30857-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.
• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling st..
Brand: Bel-Art
Model: F30852-0000
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling sta..
Brand: Bel-Art
Model: H19728-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19727-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art
Model: H19729-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and oth..
Brand: Bel-Art
Model: F30848-0004
Pinch valve allows control of fluid flow without drips.
• Squeeze soft silicone body to permit flow
• Release pressure to suspend flow
• Withstands approximately 16 lbs. of pressure
• Made of Teflon®, stainless steel and polypropylene for maximum chemical-resistance
• Steam autoclavable at 121°C (25..
Brand: Bel-Art
Model: H21010-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cutsNote: Not recommended for latex tubing...
Brand: Bel-Art
Model: H21195-0034
Teflon® PTFE plastic tubing can be ordered by the foot to suit your needs.
• Superior chemical resistance
• High degree of flexibility allows multiple twists and turns in tight spaces
• Non-stick surface will not collect particulatesTEFLON® is a registered trademark of The Chemours Company FC LLC an..
Brand: Bel-Art
Model: F19730-0001
Connect same or different size tubing with these polyethylene plastic connectors.
• Ideal for vacuum applications, water lines, manometers, and more
• F19730 series connects same size tubing
• F19731-0552 connects different size tubing..
Brand: Bel-Art
Model: F19730-0002
Connect same or different size tubing with these polyethylene plastic connectors. • Ideal for vacuum applications, water lines, manometers, and more
• F19730 series connects same size tubing
• F19731-0552 connects different size tubing..
Brand: Bel-Art
Model: H21011-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cuts Note: Not recommended for latex tubing...
