Search Criteria
Products meeting the search criteria
Brand: Bel-Art
Model: F18856-0000
Heavy Duty Test Tube RackFor 13-16mm Tubes, 50 PlacesThese heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport.
Stackable and compact
Base tier has rounded wells with drain holesTop tier has lettered and numbered rowsPolypropylene; steam autoclavable at 121ºC (250º..
Brand: Bel-Art
Model: F18905-0001
This tray with rack insert can accommodate up to fifty 1.5ml tubes (or other tubes with a diameter less than 12mm) for large volume benchtop processing. To further protect tubes during transport or storage while also maintaining stackability, an optional polypropylene cover is available.• Deep tray ..
Brand: Bel-Art
Model: F18953-0000
Sturdy polypropylene plastic rack holds 50 pipettes in a vertical 5 x 10 arrangement. Top and middle decks have 16 mm diameter holes; bottom deck holes are tapered from 16 mm to 6 mm diameter• Pipette tips will not contact table surface
• End plates have handles for easy carrying
• Steam autoclavabl..
Brand: Bel-Art
Model: F19856-0250
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
Brand: Bel-Art
Model: F19856-0500
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Brand: Bel-Art
Model: F18794-0001
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 16 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369º..
Brand: Bel-Art
Model: F19858-0001
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
Brand: Bel-Art
Model: F18794-0002
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 36 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369º..
Brand: Bel-Art
Model: F18794-0000
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 8 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369ºF..
Brand: Bel-Art
Model: F18794-0028
Poxygrid Tube Slant RackFor 50ml Tubes, 8 PlacesAngled rack is useful for keeping tube caps and marked contents easily readable, frequently used reagents at an ergonomic angle or draining excess supernatant fluid from pellets.Holds eight 50ml conical tubes or other vessels up to 30mm in diameterCan ..
Brand: Bel-Art
Model: F18752-1150
Poxygrid Test Tube RackFor 10-13mm Tubes, 150 PlacesChemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak a..
Brand: Bel-Art
Model: F18760-1150
Poxygrid Test Tube RackFor 13-16mm Tubes, 150 PlacesChemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning.Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range: -223°C (-369°F) to 12..
Brand: Bel-Art
Model: H18964-0000
This rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp.
• Support disc is fully adjustable for different heights up to 21"
• Open front type support holes for easy removal and placement of separatory funnels
• Includes 18 ..
Brand: Bel-Art
Model: F18864-0001
Water Bath RackFor 13-16mm Tubes, 50 PlacesMolded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over.All racks are 21.3L x 11cmW (8³/₈ x 4⁵/₁₆")Steam autoclavable at 121ºC (250ºF)..
Showing 1 to 14 of 14 (1 Pages)
